dmesg - Ubuntu 19.04
dt-cpu-ftrs: setup for ISA 3000
dt-cpu-ftrs: not enabling: system-call-vectored (disabled or unsupported by kernel)
dt-cpu-ftrs: final cpu/mmu features = 0x0000f86f8f5fb1a7 0x3c006041
radix-mmu: Page sizes from device-tree:
radix-mmu: Page size shift = 12 AP=0x0
radix-mmu: Page size shift = 16 AP=0x5
radix-mmu: Page size shift = 21 AP=0x1
radix-mmu: Page size shift = 30 AP=0x2
radix-mmu: Initializing Radix MMU
radix-mmu: Partition table (____ptrval____)
radix-mmu: Mapped 0x0000000000000000-0x0000000040000000 with 1.00 GiB pages (exec)
radix-mmu: Mapped 0x0000000040000000-0x0000002000000000 with 1.00 GiB pages
radix-mmu: Process table (____ptrval____) and radix root for kernel: (____ptrval____)
Linux version 5.0.0-32-generic (buildd@bos02-ppc64el-021) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #34-Ubuntu SMP Wed Oct 2 02:06:32 UTC 2019 (Ubuntu 5.0.0-32.34-generic 5.0.21)
Found initrd at 0xc0000000040f0000:0xc0000000081cf764
OPAL: Found memory mapped LPC bus on chip 0
ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0
Using PowerNV machine description
printk: bootconsole [udbg0] enabled
CPU maps initialized for 4 threads per core
(thread shift is 2)
Allocated 4608 bytes for 16 pacas
-----------------------------------------------------
ppc64_pft_size = 0x0
phys_mem_size = 0x2000000000
dcache_bsize = 0x80
icache_bsize = 0x80
cpu_features = 0x0000f86f8f5fb1a7
possible = 0x0000fbffcf5fb1a7
always = 0x00000003800081a1
cpu_user_features = 0xdc0065c2 0xaee00000
mmu_features = 0x3c006041
firmware_features = 0x0000000110000000
-----------------------------------------------------
cma: Reserved 6560 MiB at 0x0000001e62000000
numa: NODE_DATA [mem 0x1fff5e0980-0x1fff5e7fff]
rfi-flush: mttrig type flush available
rfi-flush: patched 9 locations (mttrig type flush)
count-cache-flush: software flush disabled.
stf-barrier: eieio barrier available
stf-barrier: patched 61 entry locations (eieio barrier)
stf-barrier: patched 9 exit locations (eieio barrier)
Initializing IODA2 PHB (/pciex@600c3c0000000)
PCI host bridge /pciex@600c3c0000000 (primary) ranges:
MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000
MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31)
Using M64 #31 as default window
512 (511) PE's M32: 0x80000000 [segment=0x400000]
M64: 0x4000000000 [segment=0x20000000]
Allocated bitmap for 4088 MSIs (base IRQ 0xfe000)
Initializing IODA2 PHB (/pciex@600c3c0100000)
PCI host bridge /pciex@600c3c0100000 ranges:
MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000
MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15)
Using M64 #15 as default window
256 (255) PE's M32: 0x80000000 [segment=0x800000]
M64: 0x4000000000 [segment=0x40000000]
Allocated bitmap for 2040 MSIs (base IRQ 0xfd800)
Initializing IODA2 PHB (/pciex@600c3c0200000)
PCI host bridge /pciex@600c3c0200000 ranges:
MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000
MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15)
Using M64 #15 as default window
256 (255) PE's M32: 0x80000000 [segment=0x800000]
M64: 0x4000000000 [segment=0x40000000]
Allocated bitmap for 2040 MSIs (base IRQ 0xfd000)
Initializing IODA2 PHB (/pciex@600c3c0300000)
PCI host bridge /pciex@600c3c0300000 ranges:
MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000
MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31)
Using M64 #31 as default window
512 (511) PE's M32: 0x80000000 [segment=0x400000]
M64: 0x4000000000 [segment=0x20000000]
Allocated bitmap for 4088 MSIs (base IRQ 0xfc000)
Initializing IODA2 PHB (/pciex@600c3c0400000)
PCI host bridge /pciex@600c3c0400000 ranges:
MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000
MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15)
Using M64 #15 as default window
256 (255) PE's M32: 0x80000000 [segment=0x800000]
M64: 0x4000000000 [segment=0x40000000]
Allocated bitmap for 2040 MSIs (base IRQ 0xfb800)
Initializing IODA2 PHB (/pciex@600c3c0500000)
PCI host bridge /pciex@600c3c0500000 ranges:
MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000
MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15)
Using M64 #15 as default window
256 (255) PE's M32: 0x80000000 [segment=0x800000]
M64: 0x4000000000 [segment=0x40000000]
Allocated bitmap for 2040 MSIs (base IRQ 0xfb000)
OPAL nvram setup, 589824 bytes
barrier-nospec: using ORI speculation barrier
barrier-nospec: patched 553 locations
Top of RAM: 0x2000000000, Total RAM: 0x2000000000
Memory hole size: 0MB
Zone ranges:
Normal [mem 0x0000000000000000-0x0000001fffffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x0000001fffffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000001fffffffff]
On node 0 totalpages: 2097152
Normal zone: 2048 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 2097152 pages, LIFO batch:3
random: get_random_u64 called from start_kernel+0xbc/0x694 with crng_init=0
percpu: Embedded 4 pages/cpu s176024 r0 d86120 u262144
pcpu-alloc: s176024 r0 d86120 u262144 alloc=4*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
Built 1 zonelists, mobility grouping on. Total pages: 2095104
Policy zone: Normal
Memory: 126887872K/134217728K available (14400K kernel code, 1920K rwdata, 3968K rodata, 4992K init, 3226K bss, 612416K reserved, 6717440K cma-reserved)
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 36614 entries in 14 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=16.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
xive: Interrupt handling initialized with native backend
xive: Using priority 7 for all interrupts
xive: Using 64kB queues
time_init: decrementer frequency = 512.000000 MHz
time_init: processor frequency = 2700.000000 MHz
time_init: 56 bit decrementer (max: 7fffffffffffff)
clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
clocksource: timebase mult[1f40000] shift[24] registered
clockevent: decrementer mult[83126f] shift[24] cpu[0]
Console: colour dummy device 80x25
printk: console [hvc0] enabled
printk: bootconsole [udbg0] disabled
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 4, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 4, 1048576 bytes)
EEH: PowerNV platform initialized
POWER9 performance monitor hardware support registered
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 16 CPUs
numa: Node 0 CPUs: 0-15
Using standard scheduler topology
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 3, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1572125493.044:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
pstore: Registered nvram as persistent store backend
PCI: Probing PCI hardware
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
pci 0001:01:00.0: [144d:a808] type 00 class 0x010802
pci 0001:01:00.0: reg 0x10: [mem 0x600c080000000-0x600c080003fff 64bit]
pci 0001:01:00.0: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000
pci 0001:00:00.0: PCI bridge to [bus 01]
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
pci_bus 0002:00: root bus resource [bus 00-ff]
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
pci 0002:01:00.0: [1b4b:9235] type 00 class 0x010601
pci 0002:01:00.0: reg 0x10: [io 0x8000-0x8007]
pci 0002:01:00.0: reg 0x14: [io 0x8040-0x8043]
pci 0002:01:00.0: reg 0x18: [io 0x8100-0x8107]
pci 0002:01:00.0: reg 0x1c: [io 0x8140-0x8143]
pci 0002:01:00.0: reg 0x20: [io 0x800000-0x80001f]
pci 0002:01:00.0: reg 0x24: [mem 0x600c100000000-0x600c1000007ff]
pci 0002:01:00.0: reg 0x30: [mem 0x600c150000000-0x600c15000ffff pref]
pci 0002:01:00.0: BAR5 [mem size 0x00000800]: requesting alignment to 0x10000
pci 0002:01:00.0: PME# supported from D3hot
pci 0002:00:00.0: PCI bridge to [bus 01]
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0003:00
pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
pci_bus 0003:00: root bus resource [bus 00-ff]
pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff
pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330
pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit]
pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit]
pci 0003:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000
pci 0003:01:00.0: supports D1 D2
pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot
pci 0003:00:00.0: PCI bridge to [bus 01]
pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff
pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000
pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref]
pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref]
pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref]
pci 0004:01:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0004:01:00.0: BAR6 [mem size 0x00000800 pref]: requesting alignment to 0x10000
pci 0004:01:00.0: PME# supported from D0 D3hot D3cold
pci 0004:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x2 link at 0004:00:00.0 (capable of 8.000 Gb/s with 2.5 GT/s x4 link)
pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000
pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref]
pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref]
pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref]
pci 0004:01:00.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0004:01:00.1: BAR6 [mem size 0x00000800 pref]: requesting alignment to 0x10000
pci 0004:01:00.1: PME# supported from D0 D3hot D3cold
pci 0004:01:00.2: [14e4:1657] type 00 class 0x020000
pci 0004:01:00.2: reg 0x10: [mem 0x6024000060000-0x602400006ffff 64bit pref]
pci 0004:01:00.2: reg 0x18: [mem 0x6024000070000-0x602400007ffff 64bit pref]
pci 0004:01:00.2: reg 0x20: [mem 0x6024000080000-0x602400008ffff 64bit pref]
pci 0004:01:00.2: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0004:01:00.2: BAR6 [mem size 0x00000800 pref]: requesting alignment to 0x10000
pci 0004:01:00.2: PME# supported from D0 D3hot D3cold
pci 0004:00:00.0: PCI bridge to [bus 01]
pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff])
random: fast init done
pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff
pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400
pci 0005:01:00.0: supports D1 D2
pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0005:00:00.0: PCI bridge to [bus 01-02]
pci_bus 0005:02: extended config space not accessible
pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000
pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff]
pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff]
pci 0005:02:00.0: reg 0x18: [io 0x0000-0x007f]
pci 0005:02:00.0: supports D1 D2
pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0005:01:00.0: PCI bridge to [bus 02]
pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02
pci 0000:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff]
pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
pci 0001:00:00.0: BAR 14: assigned [mem 0x600c080000000-0x600c0807fffff]
pci 0001:01:00.0: BAR 0: assigned [mem 0x600c080000000-0x600c080003fff 64bit]
pci 0001:00 : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0001:01 : [PE# fd] Secondary bus 1 associated with PE#fd
pci 0001:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
IOMMU table initialized, virtual merging enabled
pci 0001:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000
pci 0001:01 : [PE# fd] Enabling 64-bit DMA bypass
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0x600c080000000-0x600c0ffefffff]
pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff]
pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
pci_bus 0001:01: resource 1 [mem 0x600c080000000-0x600c0ffefffff]
pci 0002:00:00.0: BAR 14: assigned [mem 0x600c100000000-0x600c1007fffff]
pci 0002:00:00.0: BAR 13: no space for [io size 0x1000]
pci 0002:00:00.0: BAR 13: failed to assign [io size 0x1000]
pci 0002:01:00.0: BAR 5: assigned [mem 0x600c100000000-0x600c1000007ff]
pci 0002:01:00.0: BAR 6: assigned [mem 0x600c100010000-0x600c10001ffff pref]
pci 0002:01:00.0: BAR 4: no space for [io size 0x0020]
pci 0002:01:00.0: BAR 4: failed to assign [io size 0x0020]
pci 0002:01:00.0: BAR 0: no space for [io size 0x0008]
pci 0002:01:00.0: BAR 0: failed to assign [io size 0x0008]
pci 0002:01:00.0: BAR 2: no space for [io size 0x0008]
pci 0002:01:00.0: BAR 2: failed to assign [io size 0x0008]
pci 0002:01:00.0: BAR 1: no space for [io size 0x0004]
pci 0002:01:00.0: BAR 1: failed to assign [io size 0x0004]
pci 0002:01:00.0: BAR 3: no space for [io size 0x0004]
pci 0002:01:00.0: BAR 3: failed to assign [io size 0x0004]
pci 0002:00 : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0002:01 : [PE# fd] Secondary bus 1 associated with PE#fd
pci 0002:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
pci 0002:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000
pci 0002:01 : [PE# fd] Enabling 64-bit DMA bypass
pci 0002:00:00.0: PCI bridge to [bus 01]
pci 0002:00:00.0: bridge window [mem 0x600c100000000-0x600c17fefffff]
pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff]
pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
pci_bus 0002:01: resource 1 [mem 0x600c100000000-0x600c17fefffff]
pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff]
pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit]
pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit]
pci 0003:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe
pci 0003:01 : [PE# 1fd] Secondary bus 1 associated with PE#1fd
pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000
pci 0003:01 : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000
pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass
pci 0003:00:00.0: PCI bridge to [bus 01]
pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff]
pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff]
pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff]
pci 0004:00:00.0: BAR 15: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref]
pci 0004:00:00.0: BAR 14: assigned [mem 0x600c200000000-0x600c2007fffff]
pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref]
pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref]
pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref]
pci 0004:01:00.0: BAR 6: assigned [mem 0x600c200000000-0x600c2000007ff pref]
pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref]
pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref]
pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref]
pci 0004:01:00.1: BAR 6: assigned [mem 0x600c200010000-0x600c2000107ff pref]
pci 0004:01:00.2: BAR 0: assigned [mem 0x6024000060000-0x602400006ffff 64bit pref]
pci 0004:01:00.2: BAR 2: assigned [mem 0x6024000070000-0x602400007ffff 64bit pref]
pci 0004:01:00.2: BAR 4: assigned [mem 0x6024000080000-0x602400008ffff 64bit pref]
pci 0004:01:00.2: BAR 6: assigned [mem 0x600c200020000-0x600c2000207ff pref]
pci 0004:00 : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0004:01 : [PE# 00] Secondary bus 1 associated with PE#0
pci 0004:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000
pci 0004:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000
pci 0004:01 : [PE# 00] Enabling 64-bit DMA bypass
pci 0004:00:00.0: PCI bridge to [bus 01]
pci 0004:00:00.0: bridge window [mem 0x600c200000000-0x600c27fefffff]
pci 0004:00:00.0: bridge window [mem 0x6024000000000-0x6027f7ff0ffff 64bit pref]
pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff]
pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
pci_bus 0004:01: resource 1 [mem 0x600c200000000-0x600c27fefffff]
pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7ff0ffff 64bit pref]
pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff]
pci 0005:00:00.0: BAR 13: no space for [io size 0x1000]
pci 0005:00:00.0: BAR 13: failed to assign [io size 0x1000]
pci 0005:01:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff]
pci 0005:01:00.0: BAR 13: no space for [io size 0x1000]
pci 0005:01:00.0: BAR 13: failed to assign [io size 0x1000]
pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff]
pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff]
pci 0005:02:00.0: BAR 2: no space for [io size 0x0080]
pci 0005:02:00.0: BAR 2: failed to assign [io size 0x0080]
pci 0005:00 : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0005:02 : [PE# fd] Secondary bus 2..2 associated with PE#fd
pci 0005:02 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
pci 0005:02 : [PE# fd] Setting up window#0 0..7fffffff pg=1000
pci 0005:02 : [PE# fd] Enabling 64-bit DMA bypass
pci 0005:01:00.0: PCI bridge to [bus 02]
pci 0005:01:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff]
pci 0005:01 : [PE# fc] Secondary bus 1 associated with PE#fc
pci 0005:00:00.0: PCI bridge to [bus 01-02]
pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff]
pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff]
pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
iommu: Adding device 0001:01:00.0 to group 0
iommu: Adding device 0002:01:00.0 to group 1
iommu: Adding device 0003:01:00.0 to group 2
iommu: Adding device 0004:01:00.0 to group 3
iommu: Adding device 0004:01:00.1 to group 3
iommu: Adding device 0004:01:00.2 to group 3
iommu: Adding device 0005:02:00.0 to group 4
pci 0001:00:00.0: enabling device (0101 -> 0103)
pci 0002:00:00.0: enabling device (0101 -> 0103)
pci 0003:00:00.0: enabling device (0101 -> 0103)
pci 0004:00:00.0: enabling device (0101 -> 0103)
pci 0005:00:00.0: enabling device (0101 -> 0103)
pci 0005:01:00.0: enabling device (0141 -> 0143)
EEH: PCI Enhanced I/O Error Handling Enabled
PCI: Probing PCI hardware done
cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff
cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff
cpuidle-powernv: Requested Level (RL) value of first deep stop = 0x4
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0005:02:00.0: vgaarb: bridge control possible
pci 0005:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource timebase
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 65536 (order: 4, 1048576 bytes)
TCP established hash table entries: 524288 (order: 6, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 5, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0003:01:00.0: enabling device (0140 -> 0142)
PCI: CLS 0 bytes, default 128
Unpacking initramfs...
Freeing initrd memory: 66368K
numa: Starting topology update
IMC Unknown Device type
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=38 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.28)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pci 0005:02:00.0: enabling device (0141 -> 0143)
Using unsupported 1024x768 (null) at 600c280010000, depth=32, pitch=4096
Console: switching to colour frame buffer device 128x48
fb0: Open Firmware frame buffer device on /pciex@600c3c0500000/pci@0/pci@0/vga@0
hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console)
hvc0: No interrupts property, using OPAL event
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0003:01:00.0: xHCI Host Controller
xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0003:01:00.0: Using 64-bit DMA iommu bypass
xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.0.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0003:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0003:01:00.0: xHCI Host Controller
xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0003:01:00.0: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.0.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0003:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
mousedev: PS/2 mouse device common for all mice
rtc-opal opal-rtc: registered as rtc0
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
powernv-cpufreq: cpufreq pstate min 0x63 nominal 0x42 max 0x0
powernv-cpufreq: Workload Optimized Frequency is enabled in the platform
powernv_idle_driver registered
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
drmem: No dynamic reconfiguration memory found
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: baaa2e748447b5c90f96bb7de487031473acc2be'
zswap: loaded using pool lzo/zbud
pstore: Using crash dump compression: deflate
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
rtc-opal opal-rtc: setting system clock to 2019-10-26T21:31:35 UTC (1572125495)
integrity: Unable to open file: /etc/keys/x509_ima.der (-2)
integrity: Unable to open file: /etc/keys/x509_evm.der (-2)
Freeing unused kernel memory: 4992K
This architecture does not have kernel memory protection.
Run /init as init process
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
ahci 0002:01:00.0: version 3.0
ahci 0002:01:00.0: enabling device (0541 -> 0543)
ahci 0002:01:00.0: Using 64-bit DMA iommu bypass
synth uevent: /devices/vio: failed to send uevent
vio vio: uevent: failed to send synthetic uevent
tg3.c:v3.137 (May 11, 2014)
tg3 0004:01:00.0: enabling device (0140 -> 0142)
nvme nvme0: pci function 0001:01:00.0
nvme 0001:01:00.0: enabling device (0140 -> 0142)
nvme 0001:01:00.0: Using 64-bit DMA iommu bypass
ahci 0002:01:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0002:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000100 irq 30
ata2: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000180 irq 30
ata3: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000200 irq 30
ata4: SATA max UDMA/133 abar m2048@0x600c100000000 port 0x600c100000280 irq 30
tg3 0004:01:00.0: Using 64-bit DMA iommu bypass
tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:08:de
tg3 0004:01:00.0 eth0: attached PHY is serdes (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
tg3 0004:01:00.1: enabling device (0140 -> 0142)
checking generic (600c280010000 300000) vs hw (600c280000000 1000000)
fb0: switching to astdrmfb from OFfb vga
Console: switching to colour dummy device 80x25
[drm] platform has no IO space, trying MMIO
[drm] Using device-tree for configuration
[drm] AST 2500 detected
[drm] Using Sil164 TMDS transmitter
[drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000
[TTM] Zone kernel: Available graphics memory: 66838816 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
Console: switching to colour frame buffer device 128x48
ast 0005:02:00.0: fb0: astdrmfb frame buffer device
tg3 0004:01:00.1: Using 64-bit DMA iommu bypass
tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:08:df
tg3 0004:01:00.1 eth1: attached PHY is serdes (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
tg3 0004:01:00.2: enabling device (0140 -> 0142)
tg3 0004:01:00.2: Using 64-bit DMA iommu bypass
tg3 0004:01:00.2 eth2: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:08:e0
tg3 0004:01:00.2 eth2: attached PHY is serdes (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0004:01:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0004:01:00.2 eth2: dma_rwctrl[00000000] dma_mask[64-bit]
tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1
[drm] Initialized ast 0.1.0 20120228 for 0005:02:00.0 on minor 0
tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0
usb 1-1: new high-speed USB device number 2 using xhci_hcd
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme0: 16/0/0 default/read/poll queues
nvme0n1: p1 p2
tg3 0004:01:00.2 enP4p1s0f2: renamed from eth2
usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB 2.0 Hub
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
raid6: vpermxor8 gen() 19292 MB/s
usb 1-3: new high-speed USB device number 3 using xhci_hcd
raid6: vpermxor4 gen() 17244 MB/s
raid6: vpermxor2 gen() 13874 MB/s
raid6: vpermxor1 gen() 8542 MB/s
usb 1-3: New USB device found, idVendor=1d6b, idProduct=0107, bcdDevice= 1.00
usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-3: Product: USB Virtual Hub
usb 1-3: Manufacturer: Aspeed
usb 1-3: SerialNumber: 00000000
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 5 ports detected
raid6: altivecx8 gen() 15205 MB/s
raid6: altivecx4 gen() 17241 MB/s
raid6: altivecx2 gen() 13876 MB/s
raid6: altivecx1 gen() 8542 MB/s
usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
raid6: int64x8 gen() 5345 MB/s
raid6: int64x8 xor() 2679 MB/s
raid6: int64x4 gen() 12370 MB/s
raid6: int64x4 xor() 4117 MB/s
usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.4: Product: USB 2.0 Hub
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
raid6: int64x2 gen() 9923 MB/s
raid6: int64x2 xor() 3846 MB/s
usb 1-4: new high-speed USB device number 5 using xhci_hcd
raid6: int64x1 gen() 4855 MB/s
raid6: int64x1 xor() 2188 MB/s
raid6: using algorithm vpermxor8 gen() 19292 MB/s
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
8regs : 20352.000 MB/sec
8regs_prefetch: 16848.000 MB/sec
32regs : 20608.000 MB/sec
32regs_prefetch: 18160.000 MB/sec
altivec : 23632.000 MB/sec
xor: using function: altivec (23632.000 MB/sec)
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-vpmsum
usb 1-4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-3.1: new high-speed USB device number 6 using xhci_hcd
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture ppc64-le.
systemd[1]: Set hostname to .
systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
usb 1-3.1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.1: Product: virtual_input
usb 1-3.1: Manufacturer: OpenBMC
usb 1-3.1: SerialNumber: OBMC0001
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
iscsi: registered transport (iser)
usb 1-1.4.1: new low-speed USB device number 7 using xhci_hcd
synth uevent: /devices/vio: failed to send uevent
vio vio: uevent: failed to send synthetic uevent
Adding 2097088k swap on /swapfile. Priority:-2 extents:6 across:2260928k SSFS
5 fixed-partitions partitions found on MTD device flash@0
Creating 5 MTD partitions on "flash@0":
0x000000000000-0x000004000000 : "PNOR"
IPMI message handler: version 39.2
ipmi device interface
0x0000022a1000-0x000003821000 : "BOOTKERNEL"
0x000003944000-0x000003946000 : "VERSION"
0x000003989000-0x0000039c9000 : "IMA_CATALOG"
0x000003e10000-0x000003ff0000 : "BOOTKERNFW"
ipmi-powernv ibm,opal:ipmi: IPMI message handler: The GUID response from the BMC was too short, it was 1 but should have been 17. Assuming GUID is not available.
ipmi-powernv ibm,opal:ipmi: IPMI message handler: Found new BMC (man_id: 0x00cb06, prod_id: 0x0001, dev_id: 0x00)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
at24 0-0050: 65536 byte 24c512 EEPROM, writable, 1 bytes/write
crypto_register_alg 'aes' = 0
crypto_register_alg 'cbc(aes)' = 0
at24 2-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
crypto_register_alg 'ctr(aes)' = 0
crypto_register_alg 'xts(aes)' = 0
usb 1-1.4.1: New USB device found, idVendor=04f2, idProduct=0833, bcdDevice= 2.30
usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.1: Product: USB Keyboard
usb 1-1.4.1: Manufacturer: CHICONY
at24 3-0050: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 4-0054: 256 byte spd EEPROM, read-only, 0 bytes/write
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
usb 1-4.4: new full-speed USB device number 8 using xhci_hcd
input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:1D6B:0104.0001/input/input0
hid-generic 0003:1D6B:0104.0001: input,hidraw0: USB HID v1.01 Keyboard [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input0
input: OpenBMC virtual_input as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:1D6B:0104.0002/input/input1
hid-generic 0003:1D6B:0104.0002: input,hidraw1: USB HID v1.01 Mouse [OpenBMC virtual_input] on usb-0003:01:00.0-3.1/input1
input: CHICONY USB Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:04F2:0833.0003/input/input2
systemd-journald[508]: Received request to flush runtime journal from PID 1
usb 1-4.4: New USB device found, idVendor=0d8c, idProduct=0102, bcdDevice= 0.10
usb 1-4.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-4.4: Product: USB Sound Device
input: USB Sound Device as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-4/1-4.4/1-4.4:1.3/0003:0D8C:0102.0005/input/input3
hid-generic 0003:04F2:0833.0003: input,hidraw2: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0003:01:00.0-1.4.1/input0
input: CHICONY USB Keyboard System Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/0003:04F2:0833.0004/input/input4
hid-generic 0003:0D8C:0102.0005: input,hidraw3: USB HID v1.00 Device [USB Sound Device ] on usb-0003:01:00.0-4.4/input3
input: CHICONY USB Keyboard Consumer Control as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/0003:04F2:0833.0004/input/input5
input: CHICONY USB Keyboard as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/0003:04F2:0833.0004/input/input6
hid-generic 0003:04F2:0833.0004: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0003:01:00.0-1.4.1/input1
usb 1-1.4.3: new full-speed USB device number 9 using xhci_hcd
usb 1-4.4: current rate 30464 is different from the runtime rate 96000
usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 1-4.4: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
usb 1-4.4: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 1-4.4: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-4.4: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-4.4: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
usb 1-4.4: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-4.4: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
usbcore: registered new interface driver snd-usb-audio
usb 1-1.4.3: New USB device found, idVendor=1038, idProduct=1378, bcdDevice= 0.98
usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.3: Product: Kinzu V2 Gaming Mouse
usb 1-1.4.3: Manufacturer: SteelSeries
hid-generic 0003:1038:1378.0006: hiddev1,hidraw5: USB HID v1.11 Device [SteelSeries Kinzu V2 Gaming Mouse] on usb-0003:01:00.0-1.4.3/input0
input: SteelSeries Kinzu V2 Gaming Mouse as /devices/pci0003:00/0003:00:00.0/0003:01:00.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3:1.1/0003:1038:1378.0007/input/input7
hid-generic 0003:1038:1378.0007: input,hidraw6: USB HID v1.11 Mouse [SteelSeries Kinzu V2 Gaming Mouse] on usb-0003:01:00.0-1.4.3/input1
alua: device handler registered
emc: device handler registered
rdac: device handler registered
audit: type=1400 audit(1572125498.500:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1847 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1847 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1846 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1846 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1845 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1848 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1848 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1848 comm="apparmor_parser"
audit: type=1400 audit(1572125498.500:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1843 comm="apparmor_parser"
tg3 0004:01:00.0 enP4p1s0f0: Link is up at 1000 Mbps, full duplex
tg3 0004:01:00.0 enP4p1s0f0: Flow control is on for TX and on for RX
tg3 0004:01:00.0 enP4p1s0f0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): enP4p1s0f0: link becomes ready
powernv-cpufreq: CPU 10 on Chip 0 has Pmax(0x50) reduced below that of nominal frequency(0x42)